Table of Contents
Advertisement
Draining the Fuel Tank and Carburetor
1.
Empty the fuel tank into an approved gasoline container.
2.
Remove the carburetor drain bolt with a 10 mm wrench, and drain
the carburetor bowl fuel into an approved container.
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling fuel.
Stop the engine and keep heat, sparks, and flame away.
Handle fuel only outdoors.
Wipe up spills immediately.
3.
Turn the fuel valve to the ON
position (see page
allow fuel in the fuel tank to
drain through the carburetor
b o w l . A f t e r t h e f u e l i s
completely drained, reinstall
the sealing washer and the
drain bolt.
Engine Oil
Change the engine oil (see page
Engine Cylinder
1.
Remove the spark plug (see pages
2.
Pour 5 10 cc of clean engine oil into the cylinder.
−
3.
Pull the starter grip several times to distribute the oil in the cylinder.
Reinstall the spark plug.
4.
Pull the starter grip slowly until resistance is felt, then return the
starter grip gently. This closes the valves so moisture cannot enter.
44
27
). This will
50
).
SEALING WASHER
53
and
54
).
DRAIN BOLT
Advertisement
Table of Contents
