Flywheel Brake Lever Operation Inspection; Spark Plug Service - Honda HRJ216K2 Manual

Foam element: Clean in warm soapy water, rinse, and allow it to dry
thoroughly. Or, clean in nonflammable solvent and allow it to dry.
Dip the filter element in clean engine oil, then squeeze out excess oil.
5. Wipe dirt from the inside of the air cleaner housing and cover, using
a moist rag. Be careful to prevent dirt from entering the air duct that
leads to the carburetor.
6. Reinstall the filters and cover and tighten the air cleaner nuts
securely.

Flywheel Brake Lever Operation Inspection

Start the engine outdoors and move the throttle lever to the HIGH
position. Release the flywheel brake lever; the engine should stop
quickly. If it does not, take your mower to an authorized Honda
servicing dealer for repair.

Spark Plug Service

Recommended spark plug:
An incorrect spark plug can cause engine damage.
For good performance, the spark plug must be properly gapped and
free of deposits.
1. Disconnect the spark plug cap and
remove dirt from the area.
SPARK PLUG CAP
BPR5ES (NGK) , or W16EPR-U (DENSO)
53