Table of Contents
Advertisement
3.
HRJ216 Model: Release the drive clutch lever. If the drive clutch
lever is engaged, the mower will move forward when you operate
the starter.
4.
By standing in the back side of the mower at the operating position,
push the flywheel brake lever forward and hold it against the
handlebar.
Pull the starter grip lightly until you feel resistance, then pull briskly
in the direction of the arrow as shown below. Return the starter grip
gently.
Keep your hands and feet away from the cutter housing at all times
when starting and running the engine.
Continue to hold the flywheel brake lever against the handlebar; the
engine will stop if you release the lever.
5.
If the CHOKE position was used during starting, move the throttle
lever away from the CHOKE position as soon as the engine warms
up enough to run smoothly. Set the throttle lever at HIGH to mow or
at LOW to idle.
STARTER GRIP
Direction to pull
R
R
U
U
N
N
FLYWHEEL BRAKE LEVER
29
Advertisement
Table of Contents
