Handlebar Folding - Honda HRJ216K2 Manual

Handlebar Folding

1. Remove the grass bag (if installed).
2. Loosen or remove the two handlebar locking knobs.
3. Pull the handlebar struts to release them from the locating grooves,
then swing the handlebar forward with the flywheel brake lever and
drive clutch lever (HRJ216 Model) held by your hand. Don't allow
the cables and air cleaner hose (applicable type) to be bent or
pinched.
4. Loosely install the two handlebar locking knobs.
Handlebar Setting
Squeeze the flywheel brake lever and drive clutch lever (HRJ216
Model) to release the flywheel brake and drive clutch lever (HRJ216
Model) and raise the handlebar in place in the reverse order of
handlebar folding, taking care that the cable and air cleaner hose
(applicable type) are not bent or pinched.
HANDLEBAR
LOCKING KNOBS
45