Blade Removal And Installation - Honda HR215SXA Owner's Manual

9. MAINTENANCE
BLADE REMOVAL AND INSTALLATION
When the blade needs sharpening or replacement, take the lawn mower to an
authorized Honda lawn mower dealer. Or, if you have a torque wrench, you can
remove and install the blade yourself. Wear heavy gloves to protect your hands.
l
Blade sharpening: To reduce the possibility of weakening the blade, or causing
imbalance or poor cutting performance, have the blade sharpened by an
authorized Honda lawn mower dealer.
l
Blade replacement: Use a genuine Honda replacement blade or its equivalent.
Blade Removal
1. Turn the fuel valve OFF, and rest the mower on its right side, so the carburetor
side is up.
NOTE: Hard starting and fuel leakage may result if the mower is placed with
the carburetor side down.
2. Remove the two blade bolts with a 14 mm socket wrench. Use a wooden
block to prevent the blade from turning when removing the bolts.
3. Remove the blade and blade holder.
ROTO-STOP
ASSEMBLY
BLADE
HOLDER
/
BLADE
BOLTS
54