Blade Removal And Installation - Honda HRR216TDA Owner's Manual

Blade Removal and Installation

If you remove the blade(s), use a torque wrench for installation. Wear
heavy gloves to protect your hands. To avoid weakening the blade(s),
or causing imbalance or poor cutting, the blade(s) should be
sharpened by trained staff at an authorized Honda servicing dealer. If
replacing the blade, use a genuine Honda replacement blade(s) or
equivalent.
Blade Removal
1. Turn the fuel valve to OFF. Disconnect the spark plug cap, then tilt
the mower to the right side (air filter side up).
2. Remove the two blade bolts with a 14 mm socket. Use a wooden
block to prevent the blade(s) from turning when removing the bolts.
Remove the blade(s) from the blade holder.
HRS
HRR
Always use an upper and lower blade on the HRR models.
SERVICING YOUR MOWER
BLADE HOLDER
SINGLE BLADE
SPECIAL
WASHER (2)
BLADE
BOLT (2)
BLADE HOLDER
UPPER
BLADE
LOWER
BLADE
SPECIAL
WASHER (2)
BLADE
BOLT (2)
31