AES Cellcom Prime 5AB Manual page 20

P a g e | 20
9. Auto Relay Trigger Times
Create up to 40 automatic time clock events to trigger or
latch/unlatch gates (depending on gate system setup).
For auto closing gates, send latch command at the desired
opening time, followed by a separate unlatch event to close at
the desired closing time.
For step-by-step operated gates (non auto-closing), then send
a momentary trigger command at the time required to change
the state of the gates from open to closed or closed to open.
1. Pick the type of event (momentary/latch/unlatch)
2. Choose the days
3. Enter the time in military 24hr format without colon
E.g. 8.30am = 0830. 11:10pm = 2310.
1234#1#day,day,day#time#
USER
passcode
Command:
1=trigger relay 1
2=latch relay 1
3=unlatch relay 1
4=trigger relay 2
5=latch relay 2
6=unlatch relay 2
.
10. Client list on iphone
The client list allows you to save sim phone number, customer
name and pass codes for all your installs.
Press to select Client
Swipe to
delete
On any previous install, you can load the customer and then re-
program their intercom.
Enter time in 24hr format (no colon)
Select days (up to 7)
3 digit format, separate with commas.
E.g. mon,tue,wed,thu,fri
Press to
SAVE after
editing
Press to
load details
& program