System Logs; Syslog Settings - VTech ErisTerminal VSP600A Administrator And Provisioning Manual

System Logs

On the Syslog Settings page, you can enter settings related to system logging activities.
It supports the following logging modes:
 Syslog server
 Volatile file
Under Network Trace, you can capture network traffic related to the phone's activity and
save the capture as a .pcap file. The file can be used for diagnostic and troubleshooting
purposes.
Under Download Log, you can save the system log to a file.
The Syslog settings are also available as parameters in the configuration file. See
Module: Log Settings" on page

Syslog Settings

Setting
Enable Syslog
Server address
Server port
Log Level
Using the WebUI
VSP600A Administrator and Provisioning Manual
105.
Description
Enable log output to syslog server.
Syslog server IP address.
Syslog server port.
Sets the log level. The higher the level, the larger the
debug output.
 5—ALL
 4—DEBUG
 3—INFO
 2—WARNING
 1—ERROR
 0—CRITICAL
70
""log"
Back to Contents