Time Zone And Daylight Savings Settings - VTech ErisTerminal VSP600A Administrator And Provisioning Manual

Setting
NTP Server
Use DHCP (Option 42)

Time Zone and Daylight Savings Settings

Setting
Time Zone
Automatically adjust
clock for Daylight
Savings
User-defined DST
DST Start: Month
DST Start: Week
DST Start: Day
DST Start: Hour
DST End: Month
DST End: Week
DST End: Day
DST End: Hour
Daylight Savings Offset
Use DHCP (Option
2/100/101)
Using the WebUI
VSP600A Administrator and Provisioning Manual
Description
If Enable Network Time is selected, enter the URL of your
preferred time server.
If Enable Network Time is selected, select to use DHCP to
locate the time server. Option 42 specifies the NTP server
available to the phone. When enabled, the phone obtains
the time in the following priority:
1. Option 42
2. NTP Server
3. Manual time.
Description
Select your time zone from the list.
Select to adjust the clock for daylight savings time
according to the NTP server and time zone setting. To
disable daylight savings adjustment, disable both this
setting and User-defined Daylight Savings Time.
Select to set your own start and end dates and offset for
Daylight Savings Time. To disable daylight savings
adjustment, disable both this setting and Automatically
adjust clock for Daylight Savings.
If User-defined DST is enabled, set the start date and time
for daylight savings: Month, week, day, and hour.
If User-defined DST is enabled, set the end date and time
for daylight savings: Month, week, day, and hour.
If User-defined DST is enabled, this specifies the daylight
savings adjustment (in minutes) to be applied when the
current time is between Daylight Savings Start and
Daylight Savings End.
If Enable Network Time is selected, select to use DHCP to
determine the time zone offset. Options 2, 100 and 101
determine time zone information.
57
Back to Contents