Firmware Upgrade; Firmware Server Settings - VTech ErisTerminal VSP600A Administrator And Provisioning Manual

Firmware Upgrade

You can update the VSP600A with new firmware using the following methods:
 Retrieving a firmware update file from a remote host computer and accessed via a
URL. This central location may be arranged by you, an authorized dealer, or your
SIP service provider. Enter the URL under Firmware Server Settings.
 Using a file located on your computer or local network. No connection to the
Internet is required. Consult your dealer for access to firmware update files. Click
Manual Upgrade to view the page where you can manually upgrade the
VSP600A firmware.
The firmware upgrade settings are also available as parameters in the configuration file.
See ""provisioning" Module: Provisioning Settings" on page

Firmware Server Settings

Click the link for each setting to see the matching configuration file parameter in
""provisioning" Module: Provisioning Settings" on page
listed there.
Setting
Base Firmware URL
Handset Firmware URL
Server authentication
name
Server authentication
password
To update the firmware immediately:
 Click
Using the WebUI
VSP600A Administrator and Provisioning Manual
Description
The URL where the VSP600 Base Station firmware update
file resides. This should be a full path, including the
filename of the firmware file.
The URL where the VSP601 Cordless Handset firmware
update file resides. This should be a full path, including the
filename of the firmware file.
Authentication username for the firmware server
Authentication password for the firmware server
or
59
96.
96. Default values and ranges are
.
Back to Contents