Using The Secure Browsing Menu - VTech ErisTerminal VSP600A Administrator And Provisioning Manual

To set other settings (DNS and NTP):
1. From the Network setting menu, press
SELECT.
If DHCP is disabled, the Others menu appears. If DHCP is enabled, an error message
appears briefly before returning you to the Network setting menu.
DNS1:
10.88.162.31
DNS2:
10.88.162.10
2. Enter the IP address for the primary DNS server. Use the dial pad to enter characters.
To add a period, press the * key.
3. Press
this server if the primary server does not respond.
4. Press
NTP server, you must manually enter the time and date settings.
5. Press


Using the Secure browsing menu

To turn on secure browsing:
1. From the Network setting menu, press
then press MENU/SELECT.
2. On the Secure browsing menu, press MENU/SELECT to enable or disable HTTPS.
Secure browsing
HTTPs:
Disabled
BACK
3. Press
Configuration Using the Phone Menus
Others
SAVE

and enter the IP address for the secondary DNS server. The VSP600A uses

and enter the IP address for the NTP server. If the VSP600A does not use an
SAVE .
SET
ENTER to save the setting.
VSP600A Administrator and Provisioning Manual
 
to highlight Others, and then press
or
 
to highlight Secure browsing, and
or
21
Back to Contents