Web Server; Certificates - VTech ErisTerminal VSP600A Administrator And Provisioning Manual

Web Server

Setting
HTTP Server port
Enable Secure Browsing
HTTPS Server port
To configure Web Server Settings:
1. Enter the HTTP Server port number. The default setting is 80.
2. Enable or Disable Secure Browsing. When enabled, the HTTPS protocol is used, and
you must select the HTTPS server port in the next step.
3. Enter the HTTPS server port number. The default setting is 443.
Changing the Web Server settings will reboot the VSP600A.

Certificates

You can upload an optional web server certificate to the VSP600A to establish a secure
connection between phone and server. If a certificate is not available, the VSP600A's
self-signed certificate will be used during the connection transaction.
A web server certificate can also be uploaded using provisioning. For more information, see
""file" Module: Imported File Settings" on page
To upload a web server certificate:
1. On the Server Certificate page, click
2. Locate the certificate file and click Open.
3. On the Server Certificate page, click
Using the WebUI
VSP600A Administrator and Provisioning Manual
Description
Port used by the HTTP server.
Sets the server to use the HTTPS protocol.
Port used by the HTTPS server.
114.
.
69
.
Back to Contents