Message Waiting Indicator; Call Appearance Buttons; Release Button - Avaya Definity Callmaster VI Installation And User Manual

Voice terminal

Hide thumbs Also See for Definity Callmaster VI:

Table of Contents

Message Waiting Indicator

One red LED in the center of the CALLMASTER VI serves as a

Message Waiting indicator. The lamp lights when a message is

waiting.

Note: if this lamp flashes it is an indication that the DEFINITY ECS is

not communicating with the CALLMASTER VI.

These two call appearance buttons have two lamps each. The green

lamp indicates that the line is in use, while the red lamp indicates that

there are no calls on the line at the present time.

These buttons are administrable. One suggestion is to configure them

as Send All Calls or Call Forwarding buttons for use when the PC goes

down.

The large blue button has no indicator. Pressing the Release button

clears the current call.

This button is administerable, but it is recommended that it be

assigned to the Release function.

Table of Contents

Do you have a question about the Definity Callmaster VI and is the answer not in the manual?

Callmaster vi