Dmx Addressing - ProLights DIAMOND19WH User Manual

Edit User
The Edit User, in the same menu, allows you to create a profile of personalized functions. You can change
the parameters of the various functions (Control, Pan, Tilt, etc.). Once you've created your custom profile,
you can use it by selecting the USER mode as described above.

3.12 DMX ADDRESSING

For operation via light control unit with DMX512 protocol, is sufficient connect the controller to DIA-
MOND19. To able to operate the DIAMOND19 with a light controller, adjust the DMX start address for the
first a DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first
DMX channel, adjust the start address 33 on the DIAMOND19. The other functions of the light effect panel
are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of Start address
DMX channels (example)
19 33
32 33
98 33
18 33
20 33
DMX Address: 33
DMX512 Controller
DIAMOND19
DMX Address Next possible start
occupied address for unit No. 1
33-51
33-64
33-130
33-50
33-52
DMX Address: 47
Next possible start
address for unit No. 2
52
65
131
51
53
DMX Address: 61
Fig.5 - Example 19 DMX channels configuration
Next possible start
address for unit No. 3
71
97
229
69
73
DMX Address: 75
15
90
129
327
87
93
. . . . . . . . . . . .