Functions And Settings; Operation; Basic - ProLights DIAMOND19WH User Manual

8

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to
reset all motors to their home position. Shortly after that the DIAMOND19 is ready for operation. To switch
off, disconnect the mains plug from the socket. For a more convenient operation it is recommended to
connect the unit to a socket which can be switched on and off via light switch.

3.2 BASIC

The DIAMOND19 has a LCD display and 5 button used to access the control panel functions and manage
them (fig.4).
LEFT
Return to the top Commute from
level units, tens, hundred
in the menu
CONNECT
DIAMOND19
RIGHT UP
Increases the value
displayed or passes
to the previous item
in a menu
LIGHT
DOWN
Decreases the value
displayed or passes
to the next item in
the menu
INFORMATION
Fig.4 - Functions of the buttons and display icons
Battery
ENTER
Confirms the Used to activate the
displayed value, backup battery. It
or activates the allows to switching
displayed function, display interface
or enters the without main power
successive menu
PROGRAM
SET
BATTERY