Additional Instructions For Installation Of Your Dryer In A Manufactured Or Mobile Home - Asko TLS752 XXL Operating Instructions Manual

Installation Instructions
Step 9. Additional instructions
for installation of your dryer in a
manufactured or mobile home
The following instructions are applicable to
installations of the dryer in a manufactured
or mobile home. Any installation in a
manufactured or mobile home must comply
with the Manufactured Home Construction
and Safety Standards Title 24 CFR, Part
32-80 or Standard CAN/CSA0Z240 MH
and local codes and ordinances. If you are
uncertain whether your proposed installation
will comply with these standards.
Please contact a service and installation
professional for assistance. (Customer Care
Center 1-800-898-1879 www.askousa.com)
The following instructions apply
to any installation of the dryer in a
manufactured or mobile home:
1. The electrical connection for an electric
dryer must be a 4-wire connection.
More detailed information concerning
the electrical connection is provided in
the manual section entitled electrical
requirements for electric dryer
2. To reduce the risk of combustion and
fire, the dryer must be vented to the
outside.
3. Dryers must be vented to the outside.
4. The dryer exhaust duct must be affixed
securely to the manufactured or mobile
home structure, and the exhaust duct
must be made of a material that will
resist fire and combustion, and it is
recommended that you use a rigid or
flexible metal pipe.
5. Do not connect the exhaust duct with
any other duct, vent, chimney, or other
exhaust duct.
34
6. Make sure the dryer has adequate
access to outside fresh air to ensure
proper operation. The opening for
outside fresh air must be at least 25"
(163 cm ).
2
7. It is important that the clearance of the
duct from any combustible construction
be at least 2 inches (5 cm). When
venting the dryer to the outdoors, the
dryer can be installed with a clearance of
1 inch at the sides and back of the dryer.
8. Please be aware that venting materials
are not supplied with the dryer. You
should obtain the venting materials
necessary for proper installation.
Caution!
Do not connect exhaust ducts with metal
screws or fasteners that extend into the
duct.
Do not vent the exhaust duct under the
manufactured or mobile home.
Customer Care Center
1-800-898-1879
www.askousa.com
2