Selecting Settings; Dry Sensor; Temp; Dry Time - Asko TLS752 XXL Operating Instructions Manual

Selecting Settings

Dry Sensor

• Use these buttons to set the desired dry
level.
• First, select the Sensor Dry program.
• Select the dry level to adjust how
much you want to dry the load. As the
program runs, the control senses the
dryness of the load and adjusts the time
automatically based on the selected
dryness level.
Note!
Dry Sensor selections can only be made
while using the Sensor Dry programs.
Selecting "more dry" or "less dry"
automatically adjusts the preset times for the
manual dry programs.

Temp

Use the Temp. option to select temperatures
for the Manual Dry programs.
Press Temp. until the desired temperature
setting glows. You can't change
temperatures on sensor dry programs.
Temperature is set by the program.

Dry Time

Use Dry Time option to change drying time
per your preference.
When choosing Dry Time, the temp is always
set to "High" by default however temperature
can be changed per your desired setting.
You can select the desired operation time
18
manually by pressing the Dry Time button
between 20 to 60 minutes.

Signal

The Signal controls the volume of the beep
that is made at the end of the cycle.
Press Signal to adjust the sound level or turn
off the signal.
Customer Care Center
1-800-898-1879
www.askousa.com