Selecting Settings; Dry Sensor; Temp; Dry Time - Asko TL751 XXL Operating Instructions Manual

Selecting settings

Dry Sensor

• Use these buttons to set dry level.
• First, select the Sensor Dry program.
• Select dry level to adjust how much you
want to dry the load. As the program
runs, the control senses the dryness
of the load and adjusts the time
automatically based on the selected
dryness level.
Note!
Dry Sensor selections can only be made
while using the Sensor Dry programs.
Selecting "more dry" or "less dry"
automatically adjusts the preset times for
the manual dry programs.

Temp

Use the Temp. option to select
temperatures for the Manual Dry programs.
Press Temp. until the desired temperature
setting glows. You can't change
temperatures on sensor dry programs.
Temperature is set by the program.

Dry Time

Use Dry Time option to change drying
time per your preference. When choosing
Dry Time, the temp is always set to "High"
by default however temperature can be
changed per your desired setting. You can
16
select the desired operation time manually
by pressing the Dry Time button between
20 to 60 minutes.

Signal

The Signal controls the volume of the beep
that is made at the end of the cycle. Press
Signal to adjust the sound level or turn off
the signal.
Customer Care Center
1-800-898-1879
www.askousa.com