Download Print this page

4: Operating The Device - FIBARO FGPB-101-5 Operating Manual

Fibaro button

Advertisement

#4: Operating the device

Operating the Button:
1 click:
send action to associated devices (switch on/off by de-
fault) and/or trigger a scene
2 clicks:
send action to associated devices (switch on maximum
level by default) and/or trigger a scene
3 clicks:
send action to associated devices (no action by default)
and/or trigger a scene
4 clicks:
wake the device up and/or trigger a scene
5 clicks:
start reset procedure (press and hold for 5s to confirm)
and/or trigger a scene
6 or more
learning mode (adding/removing)
clicks:
Hold:
send action to associated devices (start level change up/
down) and/or trigger a scene
Release:
send action to associated devices (stop level change)
and/or trigger a scene
Waking up the device:
The Button needs to be woken up to receive information about the
new configuration from the controller, like parameters and associa-
tions.
Click the Button 4 times to wake it up.
Scene ID:
Every
action
with
Button is send to the main
controller with Scene ID
equal to 1. Controller recog-
nizes type of action using the
attribute assigned to it.
Reset procedure of the Button:
Reset procedure allows to restore the device back to its factory set-
tings, which means all information about the Z-Wave controller and
user configuration will be deleted. In order to reset the device:
1. Click the Button exactly five times.
2. Press and hold the Button for at least 5 seconds.
Action
the
1 click
2 clicks
3 clicks
4 clicks
5 clicks
hold
Release
Attribute
Key Pressed 1 time
Key Pressed 2 times
Key Pressed 3 times
Key Pressed 4 times
Key Pressed 5 times
Key held Down
Key Released
i
NOTE
If
notifications
enabled, each press
of the button results
in sending a com-
mand
(notification
Type=hOME_SECuRI-
TY,
Event=Intrusion,
unknown Location).
i
NOTE
Resetting the device is
not the recommend-
ed way of removing
the device from the
Z-Wave network. use
reset procedure only
if the primary con-
troller is missing or
inoperable.
Certain
device removal can be
achieved by the pro-
cedure of removing.
OPERATInG ThE DEvICE
7
are

Advertisement

loading