Pulsar PSDCB09129C Manual page 5

www.pulsar.pl
Electrical parameters (tab. 3)
Mains supply
Current up to
Supply power
Efficiency
Output voltage
Output current
Output current t
AMB
Output current t
AMB
Voltage adjustment range
Ripple
Battery charge current
Short-circuit protection SCP
Overload protection OLP
Battery circuit protection SCP and reverse
polarity connection
Surge protection
Overvoltage protection OVP
Excessive discharge protection UVP
Tampering protection system:
- TAMPER – indicating unwanted opening of the
PSU's enclosure
LED indication:
- AC diode indicating AC power status
- AUX diode indicating DC power status at
the PSU output
F1÷F9 fuse
Mechanical parameters (tab. 4)
Enclosure dimensions
Fixation
Fitting battery
Net/gross weight
Enclosure
Closing
Connectors
Notes
Operation safety (tab.5)
Protection class PN-EN 60950-1:2007
Protection grade PN-EN 60529: 2002 (U)
Electrical strength of insulation:
- between input and output circuits of the PSU (I/P-O/P)
- between input circuit and PE protection circuit (I/P-FG)
- between output circuit and PE protection circuit (O/P-FG)
Insulation resistance:
- between input circuit and output or protection circuit
<30° C
=40° C
280 x 292 x 88 (285 x 297 x 80+8) (WxHxD)
se figure 3
17Ah/12V (SLA) max.
2.44kg / 2.64kg
Steel plate, DC01 0,7mm colour: RAL 9003
Cheese head screw x 2 (at the front), lock assembly possible
Power supply: Φ0,63-2,50 (AWG 22-10)
OutputsФ0,41÷1,63 (AWG 26-14), battery output BAT: 6,3F-2,5
TAMPER output: wires
The enclosure does not adjoin the assembly surface so that cables can be led
PSDCB09129C
176÷264V AC
1,4A@230VAC
155W max.
83%
13,8V DC – buffer operation
11V÷
9,5V÷13,8V DC – battery-assisted operation
9x1A + 1A
9x0,77A + 4A battery charge
9x1 A + 1A battery charge - refer to chart 1
9x0,77 A + 4A battery charge - refer to chart 1
9x0.74 A + 1A battery charge - refer to chart 1
9x0.41A + 4A battery charge - refer to chart 1
12÷14VDC
120mV p-p max.
1A/4A max. @ 17Ah (± 5%)
LB9 STRIP
9x F 1A glass fuse
105-150% of power supply, automatic recovery
polymer fuse
varistors
>16V (automatic recovery)
U<9,5 V (± 5%) – disconnect of connection battery
- microswitch, NC contacts (enclosure closed),
0,5A@50V DC (max.)
- red, normal status – on, failure: off
- green, normal status – on, failure: off
F 1A/250V
5
battery charge
I (first)
IP20
3000 V/AC min.
1500 V/AC min.
500 V/AC min.
100 MΩ, 500V/DC