Yealink W90 Quick Start Manual

Dect ip multi-cell system

Hide thumbs Also See for W90:

Table of Contents

Download this manual

http://support.yealink.com/

W90 DECT IP Multi-Cell System

(V85.16)

Quick Start Guide

For W90DM/W90B firmware 130.85.0.15 or later

For W59R firmware 115.85.0.20 or later

For W53H firmware 88.85.0.20 or later

For W56H firmware 61.85.0.20 or later

For CP930W firmware 87.85.0.20 or later

For DD phone firmware 66.85.0.15 or later

Table of Contents

Need help?

Do you have a question about the W90 and is the answer not in the manual?

Page 1 W90 DECT IP Multi-Cell System (V85.16) Quick Start Guide For W90DM/W90B firmware 130.85.0.15 or later For W59R firmware 115.85.0.20 or later For W53H firmware 88.85.0.20 or later For W56H firmware 61.85.0.20 or later For CP930W firmware 87.85.0.20 or later...
Page 2 DC5V Internet Note: • If you choose method a, use Yealink supplied power adapter (5V/1.2A). A third-party power adapter may damage the device. • If you choose method b, you do not need to connect the power adapter. Make sure the hub/switch is PoE-compliant.
Page 3 3. Adjust the antenna angle. 180° 90° Defining the Device Role The W90DM is shipped as a DECT Manager (DM) and the W90B is shipped as a base station. Base Mode Options The following shows the LED status after the W90DM/W90B connects to the power and network: Base Mode Role...
Page 4 We are not liable for 1. Connect the cable correctly. problems with Yealink device arising from the use of this product; we are not liable for financial You cannot connect the cable properly.

W90dm W90b