System Event - Idis DC-E1112WR Operation Manual

Part 1 - Remote Setup
• Event Action: Select a tampering detection event
alert action.
- Send Email: Select if you wish to send an email.
Select the Image Attachment option to attach a
.jpg image of the event detected to the email.
- Remote Callback: Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the Remote Callback
feature.
- FTP Upload: Select this option if you wish to
upload images to the FTP server.
Event Action settings must be configured correctly
in order to perform event actions.
32

System Event

Select System Event and configure system event
settings. With system event enabled, system status will
be checked periodically and corresponding alerts will be
generated.
• System Alive: Select to check the system status and
then set up a schedule.
- Send Email: Select to send out an email when the
system comes on line.
- Remote Callback: Select this option to send a
message to a remote system when the system
comes on line and then select which system to send
the message to.
• Email and Remote Callback settings under Event
Action must be configured correctly in order to
send out emails and messages.