Privacy Masking - Idis DC-E1112WR Operation Manual

• Frame Rate: Designate the frame rate to be used
between the end of the Inactivity Period and the next
motion detection. When the slow shutter mode is
enabled under Video > Camera menu, the fame rate
may change. Video is transmitted and recorded at
the designated frame rate between then end of the
Inactivity Period and the next motion detection. Once
motion is detected again, the frame rate designated
under Streaming is restored immediately.
MAT (Motion Adaptive Transmission) is a feature
that lowers the frame rate when motion is not
detected to reduce the load on the network and save
on storage space. Based on the specified sensitivity
setting, no movement will be assumed if there is no
change between two consecutive images.

Privacy Masking

Select Privacy Masking to set up a privacy mask over
a specific area. The section on which a privacy mask is
applied will appear as black when monitoring video.
• Privacy Masking Setup: Set up privacy masks. (Up
to 16)
(Select)/ (Unselect): Set or remove a privacy
-
mask. Click on the button and drag & drop using
the mouse to set up a privacy mask.
- No./Name: Displays a list of active privacy masks.
The numbers indicate privacy mask numbers. Select
the empty space next to a number to assign a name
to the corresponding privacy mask. Click Delete to
remove the selected privacy mask.
Part 1 - Remote Setup
25