Fen - Idis DC-E1112WR Operation Manual

• DNS Server: Enter the DNS server's IP address. By
using the DNS server, you will be able to use domain
names instead of IP addresses when configuring the
FEN, time, or SMTP server. If the camera is connected
to the network via DHCP, select the From DHCP
option to retrieve the DNS server's IP address from the
DHCP server automatically. The updated address will
be displayed upon the subsequent connection.
• Contact your network administrator for more
information on the camera's network connection
type, the DNS server's IP address, and other related
information.
• If using DHCP or ADSL, the camera's IP address may
change from time to time. We therefore recommend
that you use the FEN feature.

FEN

Select Use FEN to enable the FEN feature.
• FEN Server: Enter the FEN Server's IP address or
domain name.
• Port: Enter the FEN Server's port number.
• Use NAT: Select if the camera is connected to the
network via a router.
• FEN Name: Enter a camera name you wish to register
to the FEN Server. Click OK to check the name's
availability.
• Help Desk: Change the settings and then click OK to
register the entered FEN name to the FEN Server. If all
the settings have been configured correctly, the FEN
Server's help desk information will be shown in the
Help Desk fields next time you enter the FEN setup
screen.
Part 1 - Remote Setup
13