Remote Callback; Ftp Upload - Idis DC-E1112WR Operation Manual

Remote Callback

Select Remote Callback to send callback messages to a
remote system.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the Remote Callback feature.
• IP Address: Enter the IP address and port number of
the remote system that will receive the messages.
• Retry: Designate how many reattempts to make if
message delivery fails.

FTP Upload

Select FTP Upload to upload .jpg image of the event
detected to an FTP server.
• FTP Server: Click Add to register a new FTP server.
Click Remove to remove a registered FTP server.
When an event is detected, a .jpg image of the event
detected image is uploaded to the Primary Server.
If the upload to the Primary Server fails, the file will
be uploaded to the Secondary Server. Upload to the
Secondary Server will continue to be attempted until
successful. Fill out the fields below and click Test to
test the FTP server connection settings. Once the test
is complete, click OK.
Part 1 - Remote Setup
27