Flir Systems Inc - FLIR SR-124 Installation And Operation Manual

Revision Date
100 03/27/2010
110 04/22/2010
120 07/30/2010
130 04/06/2011
EXPORT RESTRICTIONS
This document is controlled to FLIR Technology Level 1. The information contained in this document pertains to a
dual use product controlled for export by the Export Administration Regulations (EAR). FLIR trade secrets contained
herein are subject to disclosure restrictions as a matter of law. Diversion contrary to US law is prohibited. US
Department of Commerce authorization is not required prior to export or transfer to foreign persons or parties unless
otherwise prohibited.
PROPRIETARY
The data in this publication shall not be disclosed without permission and shall not be duplicated, used, or disclosed
in whole or in part except to the extent provided in any contract of which this document is made a part. This restriction
does not limit the customer's right to use information contained in this document if it is obtainable from another source
without restriction. The data subject to this restriction are contained in all sheets of this document and related
drawings and document specifications herein. FLIR reserves the right to make changes to its products or
specifications at any time, without notice, in order to improve design or performance and to supply the best possible
product.
COPYRIGHT
Copyright © FLIR Systems, Inc. All rights reserved. This publication, or any parts thereof, may not be reproduced in
any form without the express written permission of FLIR Systems, Inc.
FEDERAL COMMUNICATIONS COMMISSION REGULATORY INFORMATION
Modification of this device without the express authorization of FLIR Commercial Systems, Inc., may void the user's
authority under the FCC Rules to operate this device.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Shielded cables must be used to connect this device to other devices.
Pelco is a registered trademark of Pelco. Windows is a registered trademark of Microsoft Corporation.
427-0042-00-10 Revision 130

FLIR Systems Inc.

70 Castilian Dr.
Goleta, CA 93117-3027
888.747.FLIR (888.747.3547)
Intl.: +1.805.964.9797
FAX 805 685-2711
www.flir.com
Document Number:
Notes
Initial release
Minor modifications to cover and headers
Added other camera models (SR-1XX and SR-3XX)
Added FCC Regulatory Information, added SR-6xx cameras
Copyright © 2011 FLIR Systems, Inc.
427-0042-00-10
2