Table of Contents
Advertisement
Key Instruction Table
Key
↑↓
TAB
Enter
Esc
Menu Instruction Table
Create RAID Volume
Delete RAID Volume
Reset Disks to Non-RAID
Mask Disk as Spare
Exit
3.2
Create RAID Volume menu. After entering SATA RAID configuration interface, you could
use up and down arrow keys to select this menu, and then press Enter to enter the Create
RAID Volume menu, or directly input the number before the menu to enter the Create RAID
Volume menu. For other menu operations that are similar, it will not be repeated here.
A Create RAID Volume instance is shown in the following figure:
40
Description
Used to move cursor in different menus or to change values of menu options
To select the next menu option
To select a menu
To exit menu or return to previous menu from sub-menu
To create an RAID volume
To delete an existed RAID volume
To reset disks in RAID volume, and to restore them to non-RAID status
To mask the disks as spare disks. The data will be cleared, and these disks
can not be selected during RAID setting. It can be restored through the Reset
Disks to Non-RAID menu.
To exit SATA HostRAID configuration interface
Advertisement
Table of Contents
