How To Measure Automatically - Owon SDS1104 User Manual

In the right menu, select Start again, the interfaces below will be displayed in
6.
sequence. The update process will take up to three minutes. After completion, the
instrument will be shut down automatically.
Press the button to power on the instrument.
7.

How to Measure Automatically

Push the Measure button to display the menu for the settings of the Automatic
Measurements. At most 8 types of measurements could be displayed on the bottom left
of the screen.
The oscilloscopes provide 30 parameters for auto measurement, including Period,
Frequency, Mean, PK-PK, RMS, Max, Min, Top, Base, Amplitude, Overshoot, Preshoot,
Rise Time, Fall Time, +PulseWidth, -PulseWidth, +Duty Cycle, -Duty Cycle, Delay
A→B , Delay A→B , Cycle RMS, Cursor RMS, Screen Duty, Phase, +PulseCount,
-PulseCount, RiseEdgeCnt, FallEdgeCnt, Area, and Cycle Area.
The "Automatic Measurements" menu is described as the following table:
Function Menu
AddCH1
4.Advanced User Guidebook
Setting Description
Press to show the left menu, turn the M knob to
Meas Type
select the measure type, press AddCH1 again
(left menu)
to add the selected measure type of CH1.
38