Dip Switch Settings; 5-Inch Speed Dome Settings - HIKVISION DS-2AE7232TI-A Quick Start Manual

1.2 DIP Switch Settings

1.2.1 5-inch Speed Dome Settings

The DIP switch is used for setting the address and baudrate for the speed dome, with value ON=1
and OFF=0.
The SW1 switches from the first to the eighth are used to set the address. The SW2 switches are
used to set the baudrate.
The default dome address is 0. The default baudrate is 2400.
Figure 1-2 DIP Switch Settings for 5-inch Outdoor Speed Dome
Figure 1-3 DIP Switch Settings for 5-inch Indoor Speed Dome

Address Settings
The SW1 switches from 1 to 5 are used for setting the address of speed dome. You can refer to
Table 1-2 for details of setting the speed dome address to a specific number.
HD-TVI Speed Dome·Quick Start Guide
DIP Switch
DIP Switch
1 2 3 4 5 6 7
8
Figure 1-4 Enlarged View of DIP Switch
Table 1-2 Set the Dome Address
1 2
2