In-Door Mounting Applications; 5-Inch Speed Dome In-Ceiling Mounting Applications - HIKVISION DS-2AE7232TI-A Quick Start Manual

2 In-door Mounting Applications

Before you start:
 For cement wall, you need to use the expansion screw to fix the mount. The mounting hole of
the expansion pipe on the wall should align with the mounting hole on the mount.
 For wooden wall, you can just use the self-tapping screw to fix the mount.
2.1 5-inch Speed Dome In-ceiling Mounting
Applications
Before you start:
The in-ceiling mounting is applicable to the indoor ceiling construction. The followings are the
mandatory precondition for mounting:
 The height of the space above the ceiling must be more than 250mm.
 The thickness of the ceiling must ranges from 5 to 40mm.
 The ceiling must be strong enough to withstand more than 4 times the weight of the dome and
its accessories.
Steps:
1. Rotate the lower dome counterclockwise to separate it from the back box as shown in Figure 2-1.
2. Remove the protective lens cover, foam and sticker from the dome drive.
3. Set the address and baudrate for the analog speed dome. Please refer to the Section 1.2.1 5-inch
Speed Dome Settings for DIP switch settings.
4. Attach lower dome to the back box, and rotate clockwise to secure it.
Back Box
5. Drill a hole on the ceiling according to the drill template (supplied).
±
2mm of the diameter of the circle is tolerable.
HD-TVI Speed Dome·Quick Start Guide
Sticker
Figure 2-1 Remove the Protective Accessory
14
Protective Foam
Lower Dome