Application And Operations; System Application; Basic Operations - HIKVISION DS-2AE7232TI-A Quick Start Manual

3 Application and Operations

3.1 System Application

The device can be controlled through the back-end device or control software. The back-end device
includes control keyboard, DVR (Digital Video Recorder), etc., and the control software includes
client software. Here we take the connection of DVR as the example.
Speed Dome
 If both the speed dome and the DVR support the coaxial function, the RS485 cable is not
necessary.
 The HD-TVI video output can only be connected to specific HD-TVI DVR.

3.2 Basic Operations

Make sure the speed dome is connected properly, and the following basic operations are
supported:
Panning and tilting:
Click the direction buttons to control the pan and tilt movement of the speed dome.
Zooming:
Click the ZOOM+ and ZOOM- buttons to control the zooming.
Focusing:
Click the FOCUS+ and FOCUS- buttons to adjust the focus.
Iris:
Click the IRIS+ and IRIS- buttons to adjust the iris.
Preset control:
The speed dome supports the preset function, and the configurable preset range varies according
to the control system. The system menu pops up after you call the No.95 preset
The main menu interface is shown as follows:
HD-TVI Speed Dome·Quick Start Guide
SYV
RS485 Cable
Figure 3-1 System Application
24
DVR
Monitor