Installation; Connecting The Cables - HIKVISION DS-2AE7232TI-A Quick Start Manual

HD-TVI Speed Dome·Quick Start Guide

1 Installation

Before you start:
Check the package contents and make sure that the device in the package is in good condition and
all the assembly parts are included.
There are several ways to install the analog speed dome. The wall mounting is taken as an example
below.

1.1 Connecting the Cables

Please turn the power off before connecting the cables.
The cable interfaces of speed dome are shown in following figure. The cables are distinguished by
different colors. The labels attached on the cables are for identification.
The cables may vary according to different camera models. Please refer to the actual device.
Power Supply
HD-TVI Video Output
CVBS Video Output
RS485
Alarm
Figure 1-1 Cables
Table 1-1 Cables Description
Name Description
Power Supply AC24V/DC12V
HD-TVI Video Output HD-TVI and coaxial video output
CVBS Video Output SD analog video output
RS485 485 control
Alarm Alarm input and alarm output
1