Table of Contents
Advertisement
Authentication
Auth Mode
Set the authentication mode. You can make a combination of face, fingerprint, PIN, card, or ID and you can also set a
schedule for each authentication mode.
Registering auth mode
1
Press
and authenticate with the Admin level credential.
2
Select AUTHENTICATION > Auth Mode, and press
3
Press + and select one of options you want to use. To add additional options, repeat this step.
4
Press Schedule and set a schedule.
NOTE
•
You can combine selected authentication mode to authenticate all in order or only some of the selected authentication
mode to authenticate. For example, if you combines the authentication mode with
authenticate a face, fingerprint, and PIN, and if you combine the authentication mode with
authenticates a face first and fingerprint or PIN.
A schedule can be set in BioStar 2. If there is a no preset schedule, only Always can be selected.
•
For detailed content regarding setting a schedule, refer to BioStar 2 Administrator's manual.
•
5
Press OK to save the settings.
Modifying auth mode
You can set the schedule to be used for each authentication method using a card.
1
Press
and authenticate with the Admin level credential.
2
Select AUTHENTICATION > Auth Mode.
3
Select the authentication mode to modify.
4
Modify the authentication mode by referring to
Deleting auth mode
You can set the schedule to be used for each authentication method using a card.
1
Press
and authenticate with the Admin level credential.
2
Select AUTHENTICATION > Auth Mode.
3
Press
and select the authentication mode to delete. You can select multiple options.
4
Press OK. To delete the selected option, press OK. Or, press Cancel to cancel the deletion.
.
Registering auth mode
and press OK.
+
+
, a user should
+
/
, a user
Advertisement
Table of Contents
