Table of Contents
Advertisement
You can configure the scheduled snapshot and event-triggered snapshot. The
captured picture can be stored in the local storage or network storage.
Steps:
1. Enter the Capture Settings interface: Configuration > Storage > Storage Settings >
Capture.
2. Select the desired channel number.
3. Go to Capture Schedule tab to configure the capture schedule by click-and-drag
the mouse on the time bar. You can copy the record schedule to other days by
clicking the green copy icon on the right of each time bar.
4. Click Advanced to select stream type.
5. Click Save to save the settings.
Network Camera User Manual
Capture Configuration
Advanced Setting of Capture Schedule
116
Advertisement
Table of Contents
