Table of Contents
Advertisement
version should be configured.
Steps:
1.
Enter TCP/IP Settings interface: Configuration > Network > Basic Settings >
TCP/IP
2. Configure the basic network settings, including the NIC Type, IPv4 or IPv6 Address,
IPv4 or IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, MTU settings and
Multicast Address.
3. (Optional) Check the checkbox of Enable Multicast Discovery, and then the online
network camera can be automatically detected by client software via private
multicast protocol in the LAN.
4. Configure the DNS server. Input the preferred DNS server, and alternate DNS
server.
5. Click Save to save the above settings
Network Camera User Manual
TCP/IP Settings
.
53
Advertisement
Table of Contents
