Chapter 9 Event Settings; Basic Events; Configuring Alarm Input - HIKVISION DS-2CD6924G0-IHS User Manual

Chapter 9 Event Settings

This section explains how to configure the network camera to respond to alarm
events, including basic event and smart event.

Basic Events

You can configure the basic events by following the instructions in this section,
including alarm input, alarm output, and exception. These events can trigger the
linkage methods, such as Notify Surveillance Center, Send Email, Trigger Alarm
Output, etc.
Note: Check the checkbox of Notify Surveillance Center if you want the alarm
information to be pushed to PC or mobile client software as soon as the alarm is
triggered.

9.1.1 Configuring Alarm Input

Steps:
1. Enter the Alarm Input Settings interface: Configuration > Event > Basic Event >
Alarm Input.
2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO
(Normally Open) and NC (Normally Closed). Edit the name to set a name for the
alarm input (optional).
Network Camera User Manual
87