Configure Nat (Network Address Translation) Settings - HIKVISION DS-2CD6924G0-IHS User Manual

Note:
WebSocket and WebSockets protocol are used for plug-in free live view.
3. Click Save to save the settings.
Note: A reboot is required for the settings to take effect.

Configure NAT (Network Address Translation) Settings

Purpose:
NAT interface allows you to configure the UPnP™ parameters.
Universal Plug and Play (UPnP™) is a networking architecture that provides
compatibility among networking equipment, software and other hardware devices.
The UPnP protocol allows devices to connect seamlessly and to simplify the
implementation of networks in the home and corporate environments.
With the function enabled, you don't need to configure the port mapping for each
port, and the camera is connected to the Wide Area Network via the router.
Steps:
1. Enter the NAT settings interface. Configuration > Network > Basic Settings >
NAT.
2. Check the checkbox to enable the UPnP™ function.
Note:
Only when the UPnP™ function is enabled, ports of the camera are active.
3. Choose a friendly name for the camera, or you can use the default name.
Network Camera User Manual
UPnP Settings
58