Configure Capture Schedule - HIKVISION DS-2CD6924G0-IHS User Manual

detection area and check the checkbox of Trigger Channel in the Linkage
Method of Motion Detection Settings interface.

Record Triggered by Alarm
If you select Alarm, the video will be recorded when the alarm is triggered via
the external alarm input channels.
Besides configuring the recording schedule, you have to set the Alarm Type
and check the checkbox of Trigger Channel in the Linkage Method of Alarm
Input Settings interface. For detailed information, please refer to Section
9.1.1.

Record Triggered by Motion & Alarm
If you select Motion & Alarm, the video will be recorded when the motion
and alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
Record Triggered by Motion | Alarm
If you select Motion | Alarm, the video will be recorded when the external
alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.

Record Triggered by Events
If you select Event, the video will be recorded if any of the events is triggered.
Besides configuring the recording schedule, you have to configure the event
settings.
6. Select the record type, and click-and-drag the mouse on the time bar to set the
record schedule.
7. Click Save to save the settings.

Configure Capture Schedule

Purpose:
Network Camera User Manual
115