Table of Contents
Advertisement
9. Click Save to save the settings.
Configuring Picture Overlay
Purpose:
Picture overlay enables you to overlay a picture on the image. This function enables a
certain enterprise or users to overlay their logo on the image.
Steps:
1. Enter the Picture Overlay Settings interface, Configuration > Image > Picture
Overlay.
2. Select the desired channel number from the drop-down list.
3. Click Browse to select a picture.
4. Click Upload to upload it.
5. Check Enable Picture Overlay checkbox to enable the function.
6. Set X Coordinate and Y Coordinate values adjust the picture position on the
image. Adjust Picture Width and Picture Height to the desired size.
7. Click Save to save settings.
Note:
The picture must be in RGB24 bmp format and the maximum picture size is
128*128.
Network Camera User Manual
Picture Overlay
86
Advertisement
Table of Contents
