HIKVISION DS-2CD6924G0-IHS User Manual page 37

2. Select the Time Zone of your location from the drop-down menu.
3. Configure the NTP settings.
(1) Click to enable the NTP function.
(2) Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP
server.
(3) (Optional) You can click the Test button to test the time synchronization
function via NTP server.
Note: If the camera is connected to a public network, you should use a NTP server
Network Camera User Manual
Time Settings
Time Sync by NTP Server
36