Table of Contents
Advertisement
Settings > HTTPS.
2. Check Enable to access the camera via HTTP or HTTPS protocol.
3. Create the self-signed certificate or authorized certificate.
Create the self-signed certificate
(1) Select Create Self-signed Certificate as the Installation Method.
(2) Click Create button to enter the creation interface.
(3) Enter the country, host name/IP, validity and other information.
(4) Click OK to save the settings.
Note:
If you already had a certificate installed, the Create Self-signed
Certificate is grayed out.
Create the request and import the authorized certificate
(1) Select Create the certificate request first and continue the installation as
Network Camera User Manual
HTTPS Configuration Interface
Create Self-signed Certificate
67
Advertisement
Table of Contents
