Network Service - HIKVISION DS-2CD6924G0-IHS User Manual

1. Check the Enable ONVIF checkbox to enable the function.
2. Add ONVIF users. Up to 32 users are allowed.
Set the user name and password, and confirm the password. You can set the
user as media user, operator, and administrator.
Note: ONVIF user account is different from the camera user account. You
have set ONVIF user account independently.
3. Save the settings.
Note: User settings of ONVIF are cleared when you restore the camera.

Network Service

Purpose:
You can control the ON/OFF status of certain protocol that the camera supports.
Notes: Supported services vary according to camera models.
Keep unused function OFF for security concern.
 WebSocket or WebSockets protocol are used for plug-in-free live view.
When you use Google Chrome 57 and its above version or Mozilla Firefox 52 and
its above version to visit your camera, you should enable WebSocket or
Websokets protocol. Otherwise, live view function is not usable.
If the camera uses HTTP, enable WebSocket.
If the camera uses HTTPS, enable WebSockets.
 SDK Service and Enhanced SDK Service
If you want to add the device to the client software, you should enable SDK
Service or Enhanced SDK Service.
SDK Service: SDK protocol is used.
Enhanced SDK Service: SDK over TLS protocol is used. Communication between
the device and the client software is secured by using TLS (Transport Layer
Security) protocol.
 TLS (Transport Layer Security)
The device offers TLS 1.1 and TLS 1.2. Enable one or more protocol versions
Network Camera User Manual
72