Table of Contents
Advertisement
Panel mount
The panel mounting kit includes the following:
•
6 mounting clamps
1. Before starting any installation procedures, attach the poron foam to
the Panel PC.
Poron foam
2. Select a place on the panel (or wall) where you will mount the Panel PC.
3. Cut out a shape on the panel that corresponds to the Panel PC's rear
dimensions (210.5mm x 132.2mm) and ensure that the Panel PC can be
fitted into the panel properly.
5
Mounting hole
Panel
4. Insert the Panel PC from the outside surface of the panel into the
mounting hole until it is properly fitted against the panel.
5. Position the mounting clamps along the rear edges of the Panel PC and
insert them into the slits around the Panel PC.
210.50
9
Advertisement
Table of Contents
