Table Of Contents - r.LiNK CI-RL3-R40 Manual

Contents
1. Prior to installation
1.1. Delivery contents
1.2. Checking the compatibility of vehicle and accessories
1.3. Connection Video-Interface
1.4. Settings of the 8 Dip switches (black)
1.4.1. Enabling the interface's video inputs (dip 2-3)
1.4.2. Rear-view camera setting (dip 5)
1.5. Settings of the 4 Dip switches (CAN function - red)
2. Installation
2.1. Place of installation
2.1.1. Place of installation - video interface
2.1.2. Place of installation -daughter PCB
2.2. Connection schema
2.3. Connection to the head-unit
2.3.1. Installation of the Exchange - retaining plate and the daughter PCB
2.3.2. Connecting ribbon cables
2.3.2.1. Ribbon cable - 66pin
2.3.2.2. Warning notes, concerning the installation of ribbon cables
2.4. Connection from monitor to the video interface
2.5. Connection to the head-unit - Power / CAN
2.6. Connecting video sources
2.6.1. Video-sources to Video IN1 and Video IN2
2.6.2. Audio-insertion
2.6.3. After-market rear-view camera
2.6.3.1. Case 1: Video-interface receives the reverse gear signal
2.6.3.2. Case 2: Video interface does not receive the reverse gear signal
2.6.3.3. Video signal connection for the rear-view camera
2.7. Connecting video-interface and external keypad
2.8. Picture settings and guide lines
3. Interface operation
3.1. By CALL OFF button
3.2. By keypad
4. Specifications
5. FAQ - Trouble shooting
Version 16.03.2020 HW: CAM(V97)/(V30) CI-RL3-R40