Table of Contents
Advertisement
Wi-Fi Protected Setup (WPS) Example III:
PBC Method:
1. Press the PBC radio button, Then Start WPS.
2. Launch the wireless client's WPS Utility (e.g. Ralink Utility). Set the Config Mode as Enrollee. Then
press the WPS button and choose the correct AP (e.g. Billion_AP) from the WPS AP List section
before pressing the PBC button to run the scan.
3. When the PBC button is pushed, a wireless communication will be established between your router
and the PC. The client's SSID and security setting will now be configured to match the SSID and
security setting of the router.
Advertisement
Table of Contents
