Table of Contents
Advertisement
Wi-Fi Protected Setup (WPS) Example II:
PIN Method: Configure AP as Enrollee
1. Jot down the WPS PIN (e.g. 70963205). Press Start WPS.
2. Launch the wireless client's WPS utility (e.g. Ralink Utility). Set the Config Mode as Registrar. Enter
the PIN number in the PIN Code column then choose the correct AP (e.g. Billion_AP) from the WPS
AP List before pressing the PIN button to run the scan.
3. The router's (AP's) SSID and security setting will now be configured to match the SSID and security
setting of the registrar (client).
Advertisement
Table of Contents
