Appendix 9: Blower Replacement - Osburn MATRIX 2700 INSERT Installation And Operation Manual

APPENDIX 9: BLOWER REPLACEMENT

The power should be disconnected before replacing the blower.
1. Remove the air control handle (A).
A
3. Remove the screws (D) and the air control
cover (E), Remove the air control housing (F)
and the certification plate (G).
A G
A F
Installation and Operation Manual - Matrix 2700 Insert
2.
A B
4.
A D
A E
Unscrew the two screws (C) at the bottom
of the insert. Gently pull the bottom of the
faceplate (B) forward.
A C
Unscrew the wing nuts (H) on each side of
the blower (J).
A J
A H
Page 49