Tenda F456 User Manual page 21

Connection Type: Displays a list of available Internet connection types.
IP Address: Enter the IP address provided by your ISP. Consult your local ISP if you are not clear.
Subnet mask: Enter the subnet mask provided by your ISP. Consult your ISP if you are not clear.
Gateway: Enter the gateway address provided by your ISP. Consult your local ISP if you are not clear.
Primary/Secondary DNS Server: Enter the Primary and Secondary DNS Server Addresses. Consult your
local ISP if you are not clear.
MTU: Maximum Transmission Unit. The factory default is 1450.
PPPoE
Select PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection and provides you
with a PPPoE user name and a PPPoE password. Simply enter them in corresponding fields.
Connection Type: Displays a list of available Internet connection types.
ISP User Name: Enter the PPPoE User Name provided by your ISP. Consult your ISP if you are not clear.
ISP Password: Enter the PPPoE Password provided by your ISP. Consult your ISP if you are not clear.
MPPE: Select whether to enable the MPPE authentication method.
Enable Dual Access: Select whether to enable Dual Access.
MTU: Maximum Transmission Unit. The factory default is 1450.
Tips ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
1. It is not advisable to change the factory default MTU value unless necessary, an improper MTU value may
21
Wireless N450 Home Router