Table of Contents
Advertisement
Wireless N450 Home Router
Note
1. WDS feature can only be implemented between 2 WDS‐capable wireless devices. Additionally, the SSID,
channel, security settings, and security key must be exactly the same on both such devices.
2. Note that the two devices involved must have different IP addresses on the same IP net segment. In
addition, it is advisable to disable the DHCP server on either device.
WISP Mode
If your router acquires Internet access from a wireless Access Point, please select WISP mode. Specific steps
are as follows:
1. Click Wireless>Wireless Extender, select WISP mode and click Open Scan.
2. Click Open Scan, select the AP you wish to connect and click OK.
3. View and note down the wireless security settings: security mode, cipher type, security key.
4. Click Close Scan and Save.
5. Save the settings and the router will reboot automatically.
6. Internet Connection Setup: Click Network>WAN, select Connection Setup, such as DHCP, and click Save.
38
Advertisement
Table of Contents
