Tenda F456 User Manual page 47

●
Enable IPTV: Check/uncheck to enable/disable the IPTV feature.
●
Enable IPTV STB Port: Check/uncheck to enable/disable the IPTV‐specific port.
See below for the network topology:
Note
1. If you enabled both options mentioned above, then note below: (a). Set IPTV set‐top box's connection
type to DHCP/dynamic IP or static IP (IMPORTANT: Note that the set‐top box's IP address should be on the
same IP net segment as the router's LAN IP.) if the set‐top box is connected to any port of LAN ports 1‐3. (b).
Select the dialup mode provided by your ISP if the set‐top box is connected to the IPTV‐specific port.
2. After the IPTV port is set for IPTV purpose the PC that connects to such port will not be able to obtain
an IP address or access Internet. Consider this situation before configuring this feature. Additionally, LAN
ports1‐3 can only be used as LAN ports to connect PCs instead of an IPTV set‐top box.
47
Wireless N450 Home Router